K518ISE key programmer work with the smart key emulator as below, need purchase alone: SKE-LT: Smart Key emulator - Toyota/Lexus smart key for all key lost via OBD
Red: SKE-LT-8A(88/A8)-Support 88/A8 smart key.
Green: SKE-LT-DST80(98)-Supports 98 smart key.
Blue: SKE-LT-8A(A9)-Supports A9 smart key.
Lonsdor LKE Smart Key Emulator= 4pcs SKE-LT Smart Key Emulator + 1pc SKE-LT-DSTAES 128 Bit Smart Key Emulator,LKE can be used to work as an emergency key to program when no dedicated chip.
Orange Lonsdor K518ISE SKE-LT-DSTAES 39 Chip 128 Bit Smart Key Emulator which can be used for Hilux, Fortuner, Yaris and more supports Toyota H Chip All Smart Keys Lost by OBD through offline calculation.
Emulator SLK-04 - Supports work with DSTAES smart keys [Page1 A9]. SLK-04 supports emulation/cloning/image generation - functionality of the emulator requires activation of SLK-04 additional software.
Emulator SLK-02 - Supports work with DST80 smart keys [Page1 98]. SLK-02 supports emulation/cloning - functionality of the emulator requires activation of SLK-02 additional software
The APB112 smart key simulator is used to collect the data sent from the ignition coil,aiming to identify the ignition coil troubles and decode the data of the vehicle key chip.
It can also simulate the vehicle key chip.Currently, it supports to simulate the 4D type chip. More key chip types will be supported with future upgrades.
Black MB ESL Emulator for Old and New Mercedes benz W202 W203 W208 W210 W211 W639. This device works with Mercedes EIS. It emulates both of old (W202, 208, 210) and new (203, 208, 211, 639).
Emulator SLK-03 - Supports work with DSTAES smart keys [Page1 88, A8]. SLK-03 supports emulation/cloning/image generation - functionality of the emulator requires activation of SLK-03 additional software.
Emulator SLK-01 - Supports work with DST40 smart keys [Page1 94,D4]. SLK-01 supports emulation/cloning - functionality of the emulator is part of Tango base software.
Xtool KS-01, the 5-in1 simulation card can eliminate the need to disassemble the smart box and other modules. As long as the original car data is read from the OBD to generate the simulation card, the ignition switch can be turned on to realize the function of clearing and adding the smart key.