Home
Products
    What's New
    Lonsdor KH100 Hand-Held Remote/Smart Key Programmer Support Wifi Can Detect IMMO, Unlock Toyota Smart Key

    Lonsdor KH100 Hand-Held Remote/Smart Key Programmer Support Wifi Can Detect IMMO, Unlock Toyota Smart Key

    US$189.00 17% off

    In Stock ! Original Xhorse Condor XC-Mini Plus (Condor XC-MINI II) Automotive Key Cutting Machine Built in Database

    In Stock ! Original Xhorse Condor XC-Mini Plus (Condor XC-MINI II) Automotive Key Cutting Machine Built in Database

    US$3,099.00 23% off

    PSA IMMO TOOL Mark Key Simulator PSA Pin code calculator Support Peugeot Citroen from 2001 to 2018

    PSA IMMO TOOL Mark Key Simulator PSA Pin code calculator Support Peugeot Citroen from 2001 to 2018

    US$105.00

    V3.19 BMW AK90+ II AK90+2 Key Programmer for All BMW EWS (New Generation AK90 Key Programmer)

    V3.19 BMW AK90+ II AK90+2 Key Programmer for All BMW EWS (New Generation AK90 Key Programmer)

    US$139.00 13% off

    OBDSTAR X300 DP Plus X300 PAD2 C Package Full Version 8inch Tablet Support ECU Programming and Toyota Smart Key

    OBDSTAR X300 DP Plus X300 PAD2 C Package Full Version 8inch Tablet Support ECU Programming and Toyota Smart Key

    US$1,699.00 11% off

    Lonsdor K518ISE Key Programmer Odometer Adjustment Tool  with Free BMW FEM Programming Support VW 4th 5th immobilization[Buy SK213-B Instead]

    Lonsdor K518ISE Key Programmer Odometer Adjustment Tool with Free BMW FEM Programming Support VW 4th 5th immobilization[Buy SK213-B Instead]

    US$1,199.00 33% off

    Top Selling
    Super SBB2 Key Programmer Plus  V99.99 CK-100 CK100 Auto Key Programmer
    Item No. SK235-SK117-B
    26 sold
    US$259.00 28% off
    Package offer of CK-100 V99.99 Plus V2017.17.8 T300 Auto Key Programmer
    Item No. SK11710-B
    677 sold
    US$159.00 20% off
    V50.01 CK200 CK-200 Auto Key Programmer Update Version Of CK-100 without tokens limitation
    Item No. SK167
    487 sold
    US$549.00 21% off
    Original Xhorse VVDI Key Tool Remote Maker Key Programmer V2.4.3
    Item No. SK203-B
    232 sold
    US$269.00 18% off
    OBDSTAR F102 Automatic Pin Code Reader for Nissan/Infiniti with Immobiliser and Odometer Function 【Ship from US No Tax】
    Item No. SS145-B
    383 sold
    US$74.99 15% off
Home - Products - Tech support - Lonsdor K518ISE key programmer tech support from keyprom8
« Go Back

Lonsdor K518ISE key programmer tech support from keyprom8

Matched Product
Lonsdor K518ISE Key Programmer Odometer Adjustment Tool  with Free BMW FEM Programming Support VW 4th 5th immobilization[Buy SK213-B Instead]

Lonsdor K518ISE Key Programmer Odometer Adjustment Tool with Free BMW FEM Programming Support VW 4th 5th immobilization[Buy SK213-B Instead]   Item No. SK213

Latest price:US$1,799.00 Buy It Now:US$1,199.00 33% off    Free Shipping       Click Here to Shop
Lonsdor K518ISE, the English version of Lonsdor K518, is an universal key programmer for all makes from Europe, America, Asia and China, also it can perform odometer adjustment for some makes. Its nice features are built-in Volkswagen 4th 5th adapter & RFID transponder reader / writer, program Toyota/Lexus smart key all key lost via OBD and free BMW FEM key programming (for all keys lost, enter 32-bit ISN code).

Description

Lonsdor K518ISE-Volvo S60 Smart Key-half-keyless

This help file basically includes 4 parts: Function, Operation, Attention, and  Reference.

Function

1. Add key: please first make sure if the key is a new unused one;

2. All keys lost:please first make sure if the key is a new unused one;

3. Read CEM security data: dismantle & read CEM to backup security data (make sure to backup security data before programming);

4. Key identification and unlocking: to identify if the key is a new unused one. If the remote control is invalid after key programming (on condition that battery has been installed and the remote control frequency is correct), try to import the CEM safety data to unlock key, and program again after unlocking successful.

Note:

1. For "Plug-in sensor start key (5-button)", please be sure to dismantle & read the CEM,  please refer to the "Operation Guide" or "Reference"

2.First time to use the adapter, you need to bind it with K518ISE. Go to the K518ISE home page and choose "Settings -> Binding adapter", following the direction to finish binding. One K518ISE host can bind up to 5 adapters, and the bound adapter can not be bound to other K518ISE hosts. Once bound, no need to bind again.

3. "Plug-in sensor start key (5-button)" only need to dismantle & read CEM in the co-pilot storage box and backup security data;

4. The connection between K518ISE host, adapter and RN-01 board:

/upload/pro/lonsdor-k518ise-key-programmer-m7.png

5. Read Volvo CEM please use RN-01 board:

/upload/pro/lonsdor-k518ise-key-programmer-m4.png
  

6. Connection between K518ISE host, adapter and FS-01 board:

/upload/pro/lonsdor-k518ise-key-programmer-m7.png

 

7. Read Volvo KVM please use FS-01 board:

/upload/pro/lonsdor-k518ise-key-programmer-m7.png

Operation

Read CEM security data

Volvo's CEM is basically located behind the storage box which is in front of the co-pilot seat

/upload/pro/lonsdor-k518ise-key-programmer-m7.png

 

CEM boxes may have the same appearance, but the back of the circuit wire location is different, can be called type A and B .

/upload/pro/lonsdor-k518ise-key-programmer-m7.png
/upload/pro/lonsdor-k518ise-key-programmer-m7.png

Type A: open the lid, pay attention to the black columns in the blue circle on the back of the circuit board, those are four positioning points, stably match them respectively with the white columns on RN-01 board. 

Note: The circuit board is coated with insulating glue, it is required to use the washing plate water to wash it off the blue area of the insulation coating in the contact point (solder joint) , or power can not go through, if the needle of RN-01 board is broken, it will need to wire in the corresponding locations.

(First time to use the adapter, please bind it with K518ISE host, please refer to"Function")

/upload/pro/lonsdor-k518ise-key-programmer-m7.png

Type B: Its circuit is different from that of type B, it requires to wire to read immodata, please refer to below wire instruction:

/upload/pro/lonsdor-k518ise-key-programmer-m7.png
/upload/pro/lonsdor-k518ise-key-programmer-m7.png

 

Note: Connect power to read the data, it is required to separate RN-01 board to the motherboard to prevent conduction; welding line should not exceed 15cm.

/upload/pro/lonsdor-k518ise-key-programmer-m7.png

Attention

1. When programming Volvo key, be sure to dismantle & read the CEM, as to CEM location and how to read, please refer to the "Operation" or "Reference".

2. It is required to bind the adapter when using it for the first time, you need to bind it with K518ISE. Go to the device home page and choose "Settings -> Bind adapter", following the direction to finish binding. One K518ISE host can bind up to 5 adapters, and the bound adapter can not be bound to other K518ISE hosts. Once bound, no need to bind again.

3. For 6 keys, during operation, you need to first insert the key into the key slot and then operate according to the directions. 

4. For 5-button key, please follow the prompts to insert the key into card slot, if the key can’t be inhaled, please follow the prompts to click "Cancel", the system will prompt "Please pull out and in the key within 10 sec” , and then wait for the program to execute.

5. Check if the card is locked when it can’t be kept in the key slot, locked key can’t be kept, a new card generally will not be locked.

6. When install battery to Volvo models, please pay attention that the two batteries are overlapped, separated by a white paper in between, do not just replace the above one.

Disassemble is also very simple, remove the metal key, in the place where the key lies, please find a little knife with not too sharp blade, gently open it from the gap.

7. If the remote control can’t work after programming, that mainly because operational problems, click "OK"if yes, if click "cancel" and continue to follow the prompt to operate, such operation may cause useless remote. If this happens, please re-program (you can delete the already programmed key, as to the original car key and the key that has been programmed by the vehicle, once being deleted, can only be used to program this car).

Reference

Chip model: Dedicated chip(brand new)

Remote type: 433 frequency

Key embryo no.: No.24/38

PIN code requirement: Dismantle & read CEM to backup security data and program

Remote generation: Program smart key complete, remote will automatically generated

​Under the steering wheel (BCM position):

/upload/pro/lonsdor-k518ise-key-programmer-m7.png
 

S60 car model

/upload/pro/lonsdor-k518ise-key-programmer-m7.png

Plug-in sensor-to-start key (5-button)

/upload/pro/lonsdor-k518ise-key-programmer-m7.png

Volvo's CEM is basically located behind the storage box which is in front of the co-pilot seat


/upload/pro/lonsdor-k518ise-key-programmer-m7.png

Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:
*Verification Code:
      8664    No right? Get a new Verification Code
 
Share your thoughts about this item with other users. All reviews will be reviewed within two working days, aggressive reviews and spam will be blocked.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.

Search

You can search Tech support by keyword.

Join our community: